Fully welded, rigid PVC vinyl frame will not chip, rot or peel and will never need to be painted.
Aluminum and steel reinforcements in the front mullion.
Clear 1-inch insulated glass package.
Top sloped insulating glass (a constant 35-degree pitch) is tempered for improved safety and unit integrity.
Both vents and deadlites have a built-in weep system and external glazing.
A two-part structural silicone is used to glaze the top slope and vertical deadlite portions of the unit.
Exterior grade plywood head board, seat board and jamb are 5/4-inch for improved structural and thermal performance; support brackets are not needed.
Locks and operators are mounted to the inside front area for easy access.
A multi-point locking system locks sash at top and bottom for a tighter seal and added security.
Engineered for new construction and remodeling applications.
The window is shipped completely assembled and ready to install. Fiberglass screens are included with every window.
Colors and Options
Head board, seat board and jamb are available in Birch or Oak veneer and White or Tan high-pressure laminate.
Standard frame colors are White and Tan.
Other colors are available by special order: Champagne or Cocoa exterior with White interior or White exterior with Light Oak woodgrain high-pressure laminate interior.
NEW! Contact your sales representative for more special order color selections!
One or more 3/8-inch thick glass shelves with polished edges, brackets and standards.
NEW! Glass shelf with steel support system is available for units 42 inches wide and wider. This option eliminates the need for additional brackets to support the shelf and provides a clear sightline as it spans the full width of the window.
Highly recommended: Insulation board with an “R” value of 5 can be installed under the seatboard, increasing the “R” value to 6.22.
Jamb depth up to 31 inches.
A variety of glass types and grid options are available.